CoastWatch
Dataset Summary
West Coast Regional Node

Home | Information | Data | El Niño | Software | Sites | Feedback | About Us


Surface Currents for the Bodega Bay Region

Program: Coastal Ocean Currents Monitoring Program
Sensor: CODAR HF Radar
Primary Geophysical Parameter: Surface Current velocity
Nominal Accuracy: unknown
Spatial grid: unknown, geographic
Spatial coverage: Bodega Bay
Temporal Coverage: Aug, 2006 - ongoing
FGDC Metadata
Short Description:
CoastWatch distributes surface current velocity data for the Bodega Bay Region generated by a network of CODAR High Frequency (HF) radar stations. These currents are generated as part of the Coastal Ocean Currents Monitoring Program. More specifically, these data are generated by the Bodega Bay Marine Lab, UC Davis (Professor John Largier, Principal Investigator) as part of the Bodega Ocean Observing Node. Current data are valuable in addressing environmental emergencies such as oil spills or other pollution releases and other ocean-related issues such as search and rescue operations. This is an EXPERIMENTAL dataset, distributed for scientific evaluation.
Technical Summary:
Surface currents within the Bodega Bay Region are measured using three CODAR type high-frequency radar stations distributed along the coast. The source data are processed to surface current as in Paduan and Rosenfeld, 1996. HF radar transmits a pulse and measures the resulting Bragg scattering. A Bragg backscatter results only from waves of specific wavelength that are traveling along the direction of travel of the radar pulse. The theoretical wave speed is calculated from this backscattered wavelength and the deep water dispersion relation. The HF radar station also measures the Doppler shift of the backscatter signal and calculates wave speed from the Doppler shift. Surface current is the difference between theoretical wave speed calculated from wavelength and the deep water dispersion relation and wave speed calculated from the Doppler shift of the backscatter radar signal.

An important limitation of this measurement technique is that it only measures the radial current velocity, the component of surface current towards or away from the HF station. Measurements from more than one HF station are needed to generate the absolute current velocity at any one point within the bay. By combining measurements from multiple stations, the total velocity grid is generated for the bay.

To fill in gaps in current velocity measurements in the total velocity grid, a normal mode analysis technique is used (Lipphardt et al., 2000, see http://newark.cms.udel.edu/~brucel/nma/index.html), resulting in a complete objective mapping grid with fewer data gaps.
Disclaimer:
Despite our best efforts, incorrect data may often appear within near real time data sets. NOAA CoastWatch accepts no liability for use of these data products. It is recommended that these products NOT be used for navigation.
Acknowledgement:
If this data is used for presentation or publication, please acknowledge San Francisco State University, and the Coastal Ocean Currents Monitoring Program.
References and suggested citations:
Lipphardt, B. L. Jr., A. D. Kirwan, Jr., C. E. Grosch, J. K. Lewis, J. D. Paduan. 2000. Blending HF radar and model velocities in Monterey Bay through normal mode analysis. J. Geophys. Res, vol. 105, pp. 3425-3450.

Paduan, J.D. and L.K. Rosenfeld. 1996. Remotely sensed surface currents in Monterey Bay from shore-based HF radar (CODAR), J. Geophys. Res., vol. 101, no. C9, pp. 20,669-20,686.

^ Back to main page Privacy Policy | USDOC | NOAA | NESDIS | CoastWatch